Are you searching for a approach to enhance the safety of your private home? Are you looking out for an clever doorbell that may allow you to control your entrance door regardless of the place you’re? You could now relaxation straightforward understanding that the Ring Doorbell is the reply to all of your queries. This text will stroll you thru the method of organising your Ring Doorbell step-by-step, making certain that you’ve a stress-free expertise.
Earlier than we begin, be sure you have the next instruments and supplies readily available: a drill, a screwdriver, a stage, a hammer, a pencil, and a tape measure. To put in your Ring Doorbell efficiently, additionally, you will want the next: a Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver. Upon getting collected all the mandatory provides, you may start organising your Ring Doorbell.
Armed with the mandatory instruments and supplies, you are now able to dive into the set up course of. Don’t fret, we’ll break it down into manageable steps so you may take pleasure in peace of thoughts understanding you’ve got secured your private home’s entry level.
Set up Ring Doorbell
Earlier than you begin the set up, be sure you collect all the mandatory instruments and supplies, together with the Ring Doorbell, mounting bracket, doorbell transformer, doorbell wires, drill, screwdriver, stage, hammer, pencil, and tape measure.
- Flip off energy to doorbell.
- Take away current doorbell.
- Set up mounting bracket.
- Join doorbell wires.
- Mount Ring Doorbell.
- Stage and safe Ring Doorbell.
- Restore energy to doorbell.
- Check Ring Doorbell.
Upon getting put in your Ring Doorbell, obtain the Ring app and observe the on-screen directions to finish the setup course of. You possibly can then use the app to manage your Ring Doorbell and obtain notifications when somebody rings your doorbell or triggers the movement sensor.
Flip off energy to doorbell.
Earlier than you start putting in your Ring Doorbell, it’s important to show off the ability to your current doorbell. It will forestall any electrical shocks and guarantee that you could work safely.
-
Find your doorbell breaker.
That is normally positioned in your house’s electrical panel. The doorbell breaker is often labeled “Doorbell” or “Chime.”
-
Flip off the doorbell breaker.
Upon getting discovered the doorbell breaker, flip it to the “Off” place. It will minimize off energy to your doorbell.
-
Check the doorbell.
Press the doorbell button to ensure that it’s not working. If the doorbell nonetheless rings, then you haven’t efficiently turned off the ability. Verify the breaker once more and ensure that it’s within the “Off” place.
-
Take away the quilt out of your doorbell chime.
Upon getting confirmed that the ability is off, you may take away the quilt out of your doorbell chime. It will expose the doorbell wires.
Now that you’ve turned off the ability to your doorbell, you may safely proceed with the set up of your Ring Doorbell. Bear in mind to all the time observe the directions offered within the Ring Doorbell person guide.
Take away current doorbell.
Upon getting turned off the ability to your doorbell, you may proceed with eradicating the present doorbell. This course of will fluctuate relying on the kind of doorbell you’ve gotten.
-
Take away the doorbell button.
The doorbell button is often held in place by one or two screws. Use a screwdriver to take away the screws after which gently pry the doorbell button off the wall.
-
Disconnect the doorbell wires.
Upon getting eliminated the doorbell button, you will notice two wires related to the again of the button. These are the doorbell wires. Use a pair of pliers to twist the wire nuts counterclockwise after which pull the wires aside.
-
Take away the doorbell chime.
The doorbell chime is normally positioned inside your private home, close to the entrance door. Take away the quilt from the chime after which disconnect the wires from the chime terminals. As soon as the wires are disconnected, you may take away the chime from the wall.
-
Patch the holes.
Upon getting eliminated the doorbell button and chime, you’ll be left with two holes in your wall. You possibly can patch these holes with spackling compound or caulk.
Now that you’ve eliminated the present doorbell, you’re prepared to put in your Ring Doorbell. Be certain that to observe the directions offered within the Ring Doorbell person guide.
Set up mounting bracket.
The mounting bracket is what is going to maintain your Ring Doorbell in place. It is very important set up the mounting bracket appropriately, in order that your Ring Doorbell is stage and safe.
-
Select a location for the mounting bracket.
One of the best location for the mounting bracket is subsequent to your entrance door, at a top of about 4 ft from the bottom. Be sure that the placement you select is stage and that there are not any obstructions, corresponding to bushes or shrubs, that may block the view of the Ring Doorbell.
-
Mark the placement of the mounting holes.
Use a pencil to mark the placement of the 2 mounting holes on the wall. Be sure that the marks are stage.
-
Drill the mounting holes.
Use a drill to drill two holes on the marks you made within the earlier step. The holes needs to be deep sufficient to accommodate the anchors that got here with the Ring Doorbell.
-
Insert the anchors.
Insert the anchors into the holes you simply drilled. Faucet the anchors in with a hammer till they’re flush with the wall.
-
Screw the mounting bracket to the wall.
Use the screws that got here with the Ring Doorbell to screw the mounting bracket to the wall. Be sure that the mounting bracket is stage and safe.
Now that you’ve put in the mounting bracket, you’re prepared to attach the doorbell wires and mount the Ring Doorbell.
Join doorbell wires.
Upon getting put in the mounting bracket, you want to join the doorbell wires to the Ring Doorbell. The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime.
To attach the doorbell wires, observe these steps:
-
Strip the ends of the doorbell wires.
Use a wire stripper to take away about 1/2 inch of insulation from the ends of the doorbell wires. -
Twist the ends of the doorbell wires collectively.
Twist the ends of the 2 doorbell wires collectively tightly. -
Insert the twisted wires into the terminals on the Ring Doorbell.
Insert the twisted wires into the “Entrance” and “Rear” terminals on the Ring Doorbell. Be sure that the wires are inserted all the way in which into the terminals and that they’re making good contact. -
Tighten the terminal screws.
Use a screwdriver to tighten the terminal screws till the doorbell wires are safe.
Now that you’ve related the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
Be aware: If you’re putting in a Ring Doorbell Professional, additionally, you will want to attach the ability adapter to the Ring Doorbell Professional. The ability adapter plugs into an outlet close to your doorbell.
Mount Ring Doorbell.
Now that you’ve related the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
-
Align the Ring Doorbell with the mounting bracket.
Place the Ring Doorbell over the mounting bracket in order that the screw holes on the Ring Doorbell line up with the screw holes on the mounting bracket.
-
Insert the screws.
Insert the screws that got here with the Ring Doorbell into the screw holes. Be sure that the screws are tight and that the Ring Doorbell is safe.
-
Stage the Ring Doorbell.
Use a stage to ensure that the Ring Doorbell is stage. If the Ring Doorbell shouldn’t be stage, loosen the screws and modify the place of the Ring Doorbell till it’s stage.
-
Tighten the screws.
As soon as the Ring Doorbell is stage, tighten the screws till they’re comfortable.
Now that you’ve mounted the Ring Doorbell, you may restore energy to the doorbell and take a look at the Ring Doorbell.
Stage and safe Ring Doorbell.
Upon getting mounted the Ring Doorbell to the mounting bracket, it is very important stage and safe it.
-
Use a stage to test if the Ring Doorbell is stage.
Place a stage on high of the Ring Doorbell. If the bubble within the stage is centered, then the Ring Doorbell is stage. If the bubble shouldn’t be centered, then you want to modify the place of the Ring Doorbell till it’s stage.
-
Tighten the screws that safe the Ring Doorbell to the mounting bracket.
Use a screwdriver to tighten the screws that safe the Ring Doorbell to the mounting bracket. Be sure that the screws are tight and that the Ring Doorbell is safe.
-
Apply silicone sealant across the edges of the Ring Doorbell.
It will assist to weatherproof the Ring Doorbell and stop water injury. Use a caulk gun to use a skinny bead of silicone sealant across the edges of the Ring Doorbell.
-
Enable the silicone sealant to dry utterly.
Earlier than you take a look at the Ring Doorbell, permit the silicone sealant to dry utterly. This may increasingly take a number of hours or in a single day.
Upon getting leveled and secured the Ring Doorbell, you may restore energy to the doorbell and take a look at the Ring Doorbell.
Restore energy to doorbell.
Upon getting put in the Ring Doorbell and examined it, you may restore energy to the doorbell.
-
Activate the doorbell breaker.
Find the doorbell breaker in your house’s electrical panel. Flip the breaker to the “On” place. It will restore energy to the doorbell.
-
Check the Ring Doorbell.
Press the doorbell button to ensure that the Ring Doorbell is working correctly. The Ring Doorbell ought to gentle up and you need to hear a chime inside your private home.
-
Obtain the Ring app.
If you have not already achieved so, obtain the Ring app from the App Retailer or Google Play Retailer. Create an account and observe the on-screen directions to attach your Ring Doorbell to your Wi-Fi community.
-
Arrange your Ring Doorbell.
As soon as your Ring Doorbell is related to your Wi-Fi community, you need to use the Ring app to arrange your Ring Doorbell. This contains setting your movement detection settings, privateness settings, and notification settings.
Now that you’ve restored energy to the doorbell and arrange your Ring Doorbell, you can begin utilizing it to observe your private home and reply the door from wherever.
Check Ring Doorbell.
Upon getting restored energy to the doorbell and related it to your Wi-Fi community, you need to take a look at the Ring Doorbell to ensure that it’s working correctly.
-
Press the doorbell button.
The Ring Doorbell ought to gentle up and you need to hear a chime inside your private home.
-
Open the Ring app.
In your smartphone, open the Ring app and faucet on the Ring Doorbell that you just need to take a look at.
-
View the dwell video feed.
It is best to now be capable of see a dwell video feed from the Ring Doorbell. For those who do not see a dwell video feed, test to ensure that the Ring Doorbell is related to your Wi-Fi community and that the Ring app is updated.
-
Check the movement detection.
Stroll in entrance of the Ring Doorbell and see if the movement sensor is triggered. The Ring Doorbell ought to ship you a notification in your smartphone when the movement sensor is triggered.
If you’re having issues testing your Ring Doorbell, you may contact Ring assist for assist.
FAQ
Have extra questions on putting in your Ring Doorbell? Try these continuously requested questions and solutions.
Query 1: What instruments do I would like to put in my Ring Doorbell?
Reply 1: You will want a drill, a screwdriver, a stage, a hammer, a pencil, and a tape measure. Additionally, you will want the Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver.
Query 2: Do I would like to show off the ability to my doorbell earlier than I set up it?
Reply 2: Sure, you need to all the time flip off the ability to your doorbell prior to installing it. It will forestall any electrical shocks and guarantee that you could work safely.
Query 3: How do I join the doorbell wires to the Ring Doorbell?
Reply 3: The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime. Twist the ends of the doorbell wires collectively and insert them into the terminals on the Ring Doorbell.
Query 4: How do I mount the Ring Doorbell to the wall?
Reply 4: First, set up the mounting bracket on the wall. Then, align the Ring Doorbell with the mounting bracket and insert the screws. Be sure that the Ring Doorbell is stage and safe.
Query 5: How do I take a look at my Ring Doorbell?
Reply 5: Upon getting put in the Ring Doorbell, activate the ability to the doorbell and press the doorbell button. The Ring Doorbell ought to gentle up and you need to hear a chime inside your private home. It’s also possible to take a look at the movement detection by strolling in entrance of the Ring Doorbell.
Query 6: What do I do if I am having issues putting in my Ring Doorbell?
Reply 6: If you’re having issues putting in your Ring Doorbell, you may contact Ring assist for assist.
Query 7: Can I set up my Ring Doorbell myself?
Reply 7: Sure, you may set up your Ring Doorbell your self. Nonetheless, in case you are not snug working with electrical wiring, you could need to rent knowledgeable to put in it for you.
Closing Paragraph for FAQ: These are just some of probably the most continuously requested questions on putting in a Ring Doorbell. When you’ve got every other questions, please seek the advice of the Ring Doorbell person guide or contact Ring assist.
Now that you understand how to put in a Ring Doorbell, listed here are a couple of ideas that can assist you get probably the most out of your new doorbell.
Suggestions
Listed below are a couple of ideas that can assist you get probably the most out of your new Ring Doorbell:
Tip 1: Select the proper location in your Ring Doorbell.
One of the best location in your Ring Doorbell is subsequent to your entrance door, at a top of about 4 ft from the bottom. Be sure that the placement you select is stage and that there are not any obstructions, corresponding to bushes or shrubs, that may block the view of the Ring Doorbell.
Tip 2: Use a robust Wi-Fi sign.
The Ring Doorbell requires a robust Wi-Fi sign to perform correctly. When you’ve got a weak Wi-Fi sign within the space the place you need to set up the Ring Doorbell, you could want to make use of a Wi-Fi extender or booster to enhance the sign power.
Tip 3: Arrange movement detection and notifications.
The Ring Doorbell has a built-in movement sensor that can be utilized to set off notifications in your smartphone. You possibly can customise the movement detection settings to solely obtain notifications for sure forms of movement, corresponding to folks or automobiles.
Tip 4: Join your Ring Doorbell to different sensible residence units.
The Ring Doorbell might be related to different sensible residence units, corresponding to sensible lights and sensible locks. This lets you create automated actions, corresponding to turning on the lights when somebody rings the doorbell or unlocking the door if you reply the doorbell out of your smartphone.
Closing Paragraph for Suggestions: By following the following pointers, you may get probably the most out of your new Ring Doorbell and revel in all the advantages that it has to supply.
Now that you understand how to put in and use your Ring Doorbell, you may benefit from the peace of thoughts that comes with understanding that you could monitor your private home and reply the door from wherever.
Conclusion
Putting in a Ring Doorbell is an effective way to enhance the safety of your private home and control your property. By following the steps on this information, you may simply set up your Ring Doorbell your self and begin having fun with all the advantages that it has to supply.
Abstract of Primary Factors:
- Flip off the ability to your doorbell earlier than you start set up.
- Take away your current doorbell.
- Set up the mounting bracket.
- Join the doorbell wires to the Ring Doorbell.
- Mount the Ring Doorbell to the mounting bracket.
- Stage and safe the Ring Doorbell.
- Restore energy to the doorbell.
- Check the Ring Doorbell.
Closing Message: Together with your Ring Doorbell put in, now you can take pleasure in peace of thoughts understanding that you could monitor your private home and reply the door from wherever. It’s also possible to use the Ring Doorbell to attach with different sensible residence units and create automated actions to make your private home much more safe and handy.
